Sign In | Join Free | My
Shenzhen Merrytek Technology Co., Ltd.
Shenzhen Merrytek Technology Co., Ltd Intelligent Lighting Control
Home > 1-10V Dimmable LED Driver >

ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

Shenzhen Merrytek Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output

Brand Name : Merrytek
Model Number : ML50C-PV
Certification : SEMKO /CE /RoHS
Place of Origin : China
MOQ : 100pcs
Price : Negotiation
Payment Terms : T/T or western Union or PayPal
Supply Ability : 10,000pcs per month
Delivery Time : 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Packaging Details : Packed in bubble bag firstly, and then reinforced with carton for outer packing
output voltage : 68Vdc Max
input voltage : 220-240Vac
dimming mode : 0-10V,push
production name : dimming led driver
output current : 350-1050mA selectable via DIP switch
input current : 0.26mA max
output load range : 50W max
Protection class : IP20
Life time : 50000hours
Contact Now

ML50C-PV 1x50w 0-10V and push dimmable led driver 350mA to 1050mA multi-output 123x79x23.5mm for LED Panel Light


1, Output current and output voltage can be set by DIP switches, constant output current range from 350mA to 1050mA

2, Two circuit design AC-DC-DC, no flicckering in dimming 2%-100%

3, Stand-by power below 0.5W

4, Dimmable LED driver with primary PUSH, secondary PUSH and 1-10V dimming interface

5, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required

6, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores

7, Synchronization: thanks to the MCU programme, up to 15pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch

8, Maximum length of the cable, from switch to last driver is 20m

9, Factory setting: 100% dimming level and 350mA output

10, Dim via a potentiometer

11, Support master-slave grouping net work

12, Protection: Short circuit / Over voltage / Over temperature

13, Long life span 50,000h, 5 years guaranty

14, Derating current for over high ambient temperature

Mechanical Specification

Dimming Operation:

1.Push button switch for dimming (see wiring diagram, Fig A & Fig B)

  • ON/OFF: Short push (120ms ~ 1sec) on the switch
  • Stepless dimming: Long push (>1sec) on the switch. With every other long push, the light level goes the opposite direction.
  • Synchronization: No need additional synchrony wire in larger installation, up to 15pcs drivers when connected to the same switch.

2.1-10V dimming (see wiring diagram, Fig C)

The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig C



Input voltage220-240Vac
Input frequency50-60Hz
Input current0.26A max
Power factor (Note 1)≥0.90
Stand-by power (Note 2)≤0.5W


Output current/ voltage

350mA 6~60V DC 21W max.; 500mA 6~58V DC 29W max

550mA 6~58V DC 31.9W max.; 650mA 6~58V DC 37.7W max.

700mA 6~58V DC 40.6W max.; 750mA 6~56V DC 42W max

850mA 6~56V DC 47.6W max.; 900mA 6~56V DC 50.4W max

1050mA 6~48V DC 50.4W max.

12V (0~1050mA) 12.6W max.; 24V (0~1050mA) 25.2W max.

Output load range50.4W Max.
Current accuracy±5%
Dimming mode1-10V, PUSH


Working temp.(Ta)-20~50℃
Surface temp.(Tc)85℃max
Working humidity20~85%RH non-condensing
Storage temp.-40~80℃
Life time≥50000hours


Isolation classClass Ⅰ
Protection classIP20
Over voltage300Vac, 2H
Short circuitProtection type; auto reset
No-loadProtection type; auto reset
Over temperatureProtection type; auto reset


SafetyEN61347-1 EN61347-2-13
EMCEN55015, EN61000-3-2
EN61000-3-3, EN61547
ApprovalsSEMKO, CE, RoHS
Withstand voltageIN-OUT:3.75KVAC/5mA/1min
Dimension (L x W x H)123x79x23.8mm

Press-in type terminals, 0.75-1.5mm2

Input: L, N, PUSH, PE

Output: SEC(+) SEC(-), 1-10V(+),1-10V(-)



1, Power factor and efficiency is detected at 230Vac input and full load.

2, Standby power is detected at 230Vac input and switch off led load by push button.


For LED panel light, LED down light, led strip, led tube etc…

Wire diagram

Product Tags:

led light driver


700ma dimmable led driver

China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

ML50C-PV 1x50w 0-10V / Push LED Driver Dimmable 350mA - 1050mA Multi - Output Images

Inquiry Cart 0
Send your message to this supplier
Enter your email please.
To: Shenzhen Merrytek Technology Co., Ltd.
Characters Remaining: (0/3000)
Inquiry Cart 0