Sign In | Join Free | My
Shenzhen Merrytek Technology Co., Ltd.
Shenzhen Merrytek Technology Co., Ltd Intelligent Lighting Control
Home > 1-10V Dimmable LED Driver >

25W non flickering 1-10V / PUSH dimming LED power supply Energy saving

Shenzhen Merrytek Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

25W non flickering 1-10V / PUSH dimming LED power supply Energy saving

Brand Name : Merrytek
Model Number : ML25C-PV
Certification : SEMKO / CE/ RoHS
Place of Origin : China
MOQ : 100pcs
Price : Negotiation
Payment Terms : T/T or Western Union or PayPal
Delivery Time : 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Packaging Details : Packed in bubble bag firstly, and then reinforced with carton for outer packing
Product name : 25W dimming LED power supply
Output load : 1 x 25W max.
Stand-by power : ≤0.5W
Output voltage : 68Vdc Max.
Input voltage : 220~240Vac
Dimming mode : 1-10V, PUSH
Working temperature : -25℃-50℃
Isolation Class : Class Ⅱ
Approvals : SEMKO/ CE/ RoHS
Protection Class : IP20
Contact Now

25W non flickering 1-10V / PUSH dimming LED power supply Energy saving


1, 5-year warranty

2, Dim via a potentiometer

3, Stand-by power below 0.5W

4, Primary dimming with PUSH Button

5, Secondary dimming with 1-10V dimmer

6, Flicker-free for whole dimming range

7, Support Master-Slave grouping net-working

8, Dimming level memory at mains restores

9, Derating current for over high ambient temperature

10, Protection: Short circuit/ Over temperature/ Over voltage

11, Maximum length of the cable, from push button to last driver is 20m



Input voltage220-240Vac
Input frequency50-60Hz
Input current0.14A max
Power factor (Note 1)≥0.90
Stand-by power (Note 2)≤0.5W


Output current/ voltage

250mA 6~58Vdc 14.5W max; 350mA 6~58Vdc 20W max

500mA 6~50Vdc 25W max; 700mA 6~36Vdc 25W max

Output load range25.2W Max.
Current accuracy±5%
Dimming mode1-10V, PUSH


Working temp.(Ta)-20~50℃
Surface temp.(Tc)85℃max
Working humidity20~85%RH non-condensing
Storage temp.-40~80℃
Life time≥50000hours


Isolation classClass Ⅱ, SELV
Protection classIP20
Over voltage300Vac, 2H
Short circuitProtection type; auto reset
No-loadProtection type; auto reset
Over temperatureProtection type; auto reset


SafetyEN61347-1 EN61347-2-13
EMCEN55015, EN61000-3-2
EN61000-3-3, EN61547
ApprovalsSEMKO, CE, RoHS
Withstand voltageIN-OUT:3.75KVAC/5mA/1min
Dimension (L x W x H)150x52x28mm

Press-in type terminals, 0.75-1.5mm2

Input: L,L,N,N,PUSH,PUSH,Sync,Sync

Output: SEC(+) SEC(-), 1-10V(+),1-10V(-)



1, Power factor and efficiency is detected at 230Vac input and full load.

2, Standby power is detected at 230Vac input and switch off led load by push button.

Mechanical Specification:

Dimming Operation:

1.Push button switch for dimming (see wiring diagram, Fig A & Fig B)

  • ON/OFF: Short push (120ms ~ 1sec) on the switch
  • Stepless dimming: Long push (>1sec) on the switch. With every other long push, the light level goes the opposite direction.
  • Synchronization: No need additional synchrony wire in larger installation, up to 15pcs drivers when connected to the same switch.

2.1-10V dimming (see wiring diagram, Fig C)

The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig C

Wring Diagram:






Product Tags:

led light driver


700ma dimmable led driver

China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

25W non flickering 1-10V / PUSH dimming LED power supply Energy saving Images

Inquiry Cart 0
Send your message to this supplier
Enter your email please.
To: Shenzhen Merrytek Technology Co., Ltd.
Characters Remaining: (0/3000)
Inquiry Cart 0